Power fault? Available 24/7 · English spoken · no call-out charge in Utrecht 06 28 76 37 75
24/7 help with power faults in and around Utrecht

RCD keeps tripping: how to find the cause

An RCD (residual current device, in Dutch: aardlekschakelaar) switches off as soon as current 'leaks' away, for example through a faulty appliance or moisture. That is exactly its job: it protects you against an electric shock. The trick is to find where the leak is. You can often do that yourself in a few minutes.

Speak directly to the electricianFixed price before we startNo call-out charge in UtrechtEnglish spoken
Safety first

Never hold an RCD up by hand and never tape it in place. Then your protection no longer works and you risk an electric shock or fire.

How to find the appliance

  1. Unplug everything

    On the circuits behind that RCD (often the kitchen, bathroom or utility room). Also switch off fixed appliances such as a close-in water heater or hob if possible.

  2. Switch the RCD up once

    Does it stay up now? Then the fault is in an appliance. Does it trip even without appliances? Then go to step 4.

  3. Plug the appliances back in one by one

    Wait a moment each time. If the RCD trips with a particular appliance, you have found the culprit. Don't use that appliance again until it has been checked or replaced.

  4. Does it trip without any appliances?

    Then the fault is in the installation itself: moisture in an (outdoor) socket or junction box, a damaged cable or a worn RCD. Don't keep switching it back on, call us. We test each circuit to find where the leak is.

Never work on the fuse box or live wiring yourself. Switching a breaker up or down and unplugging appliances is safe; leave all other repairs to a certified electrician.

The most common culprits

Kettle, oven or dishwasher

Heating elements start to leak after years of use. A classic cause.

Washing machine and dryer

Especially if the RCD trips while washing or spinning.

Outdoor socket or garden lighting

Moisture after rain. Does the RCD mainly trip in wet weather? Then this is often the cause.

An old RCD

RCDs wear out too. Old ones sometimes trip for no reason.

Not working? Clear emergency rates

No inflated rates or nasty surprises: we work with fixed, fair rates. You always speak directly to our own electrician, never a call centre.

Daytime

€ 90 1st hour

Mon–Fri 08:00–18:00. Then € 22.50 per quarter hour.

Evening

€ 120 1st hour

Mon–Fri 18:00–22:00. Then € 30.00 per quarter hour.

Night & weekend

€ 145 1st hour

22:00–08:00, all day Saturday, Sunday and public holidays. Then € 36.25 per quarter hour.

All prices include 21% VAT and fault diagnosis. More work or a part needed? You hear the price first and you decide.

Within the municipality of Utrecht the call-out charge is € 0. Outside it we charge a fixed € 0.40 per km. A site visit costs € 90, which we deduct in full if you go ahead with the job.

Frequently asked questions

The RCD is doing its job: it protects you. But it does mean current is leaking away somewhere. Don't keep switching it back on if it trips again straight away, and have the cause found.
Almost always because of moisture in an outdoor socket, outdoor light, garden lighting or a cable to the shed. We fix that with watertight connections and the right IP rating.
We work with a fixed hourly rate: € 90 for the first hour during the day, including VAT and diagnosis, with no call-out charge in Utrecht. In most cases the cause is found within that hour. If a part is needed, you hear the price first.
At night the appliances that switch on by themselves are running: fridge, freezer, water heater, or a dishwasher or washing machine with a delayed start. If one of those appliances has a leak, the RCD trips at the moment the appliance switches on. Moisture from dew or rain in an outdoor socket or garden lighting can also cause a fault at night. Does it happen more often? Call us and we will find the cause.
Usually not. With too many appliances on one circuit, the circuit breaker of that circuit trips, not the RCD. Does the RCD trip when many appliances are on at the same time? Then together they are often leaking just a little too much current, or one of the appliances is faulty.
If it won't switch back on, or trips again immediately, there is a fault in an appliance or in the installation. Don't keep trying and never hold it up. Call us: we test to find where the leak is and replace the RCD if needed. You hear the price upfront.
Press the test button (T) on each RCD a few times a year. It should switch off immediately. If it doesn't, have it replaced.

Can't sort it out? We come straight away.

Call or WhatsApp us, also in the evening, at night and at weekends. You always hear the price upfront.

Quick contact WhatsApp us Send a photo & get a price