Professional EV charger installation or replacement in Utrecht
Have you bought an EV charger yourself (such as Zaptec, Enphase, Tesla, Wallbox or Easee) or received one from your lease company? We take care of the complete, safe installation: from the right RCBO in the fuse box and correct cable sizing to neat cable routes through the crawl space, groundwork or tidy wall chasing.

Suitable for all common wallbox brands
As long as a charger connects to single-phase or three-phase power and, if needed, communicates via wifi or an RJ45 / Cat6 UTP data cable, we can install it professionally and safely.
Zaptec (Pro & Go)
Experience with both Zaptec Go home chargers and advanced Zaptec Pro systems. Suitable for smart charging and easy to combine with the Zaptec Sense module in the meter cupboard.
Enphase EV chargers
Ideal for homes with Enphase micro-inverters and home batteries. Integrates directly with the Enphase Envoy / IQ Gateway so you can charge as much as possible on your own solar power.
Tesla Wall Connector (Gen 3)
Very fast three-phase charging (up to 11 kW or 22 kW). Suitable for all car brands with a Type 2 connector. Works well with its own RCBO and internal wifi configuration.
Wallbox (Pulsar Plus & Max)
Compact and versatile wallboxes with Bluetooth, wifi and an optional Power Boost energy meter for dynamic load distribution.
Easee & Alfen
Robust charging stations for home and office, fitted with MID-certified energy meters for automatic business mileage and electricity reimbursement.
Chargers you bought yourself
Did you buy a charger yourself from Coolblue or Bol.com, or did it come with your lease car? We are happy to install it and connect it in line with NEN 1010.
How do we handle the electrical installation?
An EV charger draws high power continuously. A safe installation starts in the fuse box and only ends at the plug.
Its own RCBO in the fuse box
An EV charger must never be placed on a shared circuit. We always fit a separate, suitable RCBO (B16, B20 or B32 depending on the charger type) in line with NEN 1010.
Correct cable sizing
No risk of overheating or voltage drop over long distances. We calculate the exact conductor size needed: from 3x2.5 mm² or 5x2.5 mm² up to 5x4 mm² or 5x6 mm² YMvK(-as) underground cable for higher power ratings.
Cable route: neat and invisible
Where possible we run the cable neatly through the crawl space. Does the work need to go through the garden? We handle the digging and paving to the driveway. Indoors we finish with neat conduit, a tidy boxing-in or fully chased into the plaster.
Dynamic load balancing
With an energy module or current clamps in the meter cupboard, the charger takes your total power use into account in real time. When the induction hob, oven and washing machine are running at the same time, the charger automatically scales back to prevent the main fuse from tripping.
Single-phase now? Ready for three-phase
Do you still have single-phase from Stedin but want to charge at full power (11 kW) later? We build the fuse box and cabling ready for three-phase straight away. As soon as Stedin comes to upgrade your connection, you switch over without extra cabling work.
Testing, inspection & handover
After installation we test the earth resistance, RCDs and communication with the car using official installation testers. You get a full 12-month installation guarantee.
What does EV charger installation cost?
Every situation is unique: the distance from the meter cupboard to the driveway, the type of cable route and the fuse box components needed determine the price.
Site visit
We come to your home in Utrecht to inspect the meter cupboard, measure the cable route (crawl space/garden) accurately and discuss load balancing if needed.
- ✓ Inspection of the fuse box & main connection capacity
- ✓ Choosing the neatest cable route (least breaking out)
- ✓ Careful check of the P1 port / load balancing
- ✓ Fixed, binding tailored quote
- ✓ Fully deducted from the installation invoice
Price estimate from photos
Do you already have clear photos of your current meter cupboard, the route to the outside wall or driveway and the position you want for the wallbox? Send them via WhatsApp or the contact form.
- ✓ Quick technical feasibility check
- ✓ Fixed price for installation & connection
- ✓ No call-out charge within Utrecht
- ✓ Including a premium-brand RCBO and NEN 1010 testing
Frequently asked questions about EV chargers in Utrecht
Answers to the most important questions about charging speeds, cabling and capacity.
On a single-phase connection you charge at a maximum of 3.7 kW (or 7.4 kW at 32A). To charge at full power (11 kW) you need a three-phase connection (3x25A) from Stedin. We can install your fuse box and charger cabling fully ready for three-phase in advance. As soon as Stedin converts the meter, you activate full three-phase charging in one step.
No problem! We regularly install chargers bought by private and business drivers (including Zaptec, Enphase, Tesla, Wallbox, Easee or Alfen). We supply and fit the RCBO, power cable and any data cabling needed, and make sure it is commissioned safely.
An EV charger continuously uses a considerable part of your available power capacity (for example 16 amps over 3 phases). When your induction hob, oven, tumble dryer and heat pump switch on at the same time, the grid operator's main fuse can become overloaded. With dynamic load balancing the charger communicates via the P1 port or current clamps in the meter cupboard: as soon as power use in the house peaks, the charger automatically scales back. That way you always charge at the maximum safe level.
We decide that together based on your home. Where there is a crawl space, we run the cable through it to the outside wall (invisible and protected). If we need to reach a separate charging post on the driveway, we do the digging with an armoured underground cable (YMvK-as) and neatly relay the paving. Indoors we can also chase cables neatly into the wall, by agreement.
No. If you install the charger on your own property (on your own outside wall, in the garage or on your own driveway), you do not need a permit in the municipality of Utrecht. The electrical installation must, however, meet the NEN 1010 safety requirements.
Need help now or a fixed price?
Call, WhatsApp a photo of your meter cupboard or request a quote. You always know the price upfront.