1. Large kitchen appliances (> 2,000 watts)
Under NEN 1010, appliances over 2,000 W must be connected to their own, dedicated circuit. Think of a combi oven, steam oven, dishwasher or a boiling water tap (Quooker).
Getting a new kitchen, a Quooker, induction hob, air conditioning, heat pump or EV charger? INO professionally adds an extra circuit or RCBO to your existing fuse box. Always premium brands (Hager or ABB), in line with NEN 1010 and with a fixed price upfront.

Clear and fair prices including VAT, a premium-brand breaker, small materials and NEN 1010 testing.
Fitting a 16A premium-brand RCBO (B characteristic) in your current fuse box, connecting it to the busbar and testing it.
Including an extra breaker in the fuse box, pulling new 3-core wiring (or XMvK cable) and finishing with an earthed socket.
Fitting a two-phase cooking circuit (2x 230V linked) in the fuse box so you can cook safely on induction without overloading the main fuse.
Fitting a 4-pole three-phase RCBO for heavy appliances such as a heat pump, outdoor air conditioning unit or charging station.
According to the Dutch safety standard NEN 1010, a standard 16 amp (230 volt) circuit may be loaded with a maximum of 3,680 watts. To prevent wiring from overheating and fire risk, the following guidelines apply:
Under NEN 1010, appliances over 2,000 W must be connected to their own, dedicated circuit. Think of a combi oven, steam oven, dishwasher or a boiling water tap (Quooker).
A washing machine uses up to 2,500 W while heating water. If the dryer is on the same circuit and both run at the same time, the breaker trips. We install a separate circuit or fit an automatic washer-dryer switch.
Air conditioning or a hybrid heat pump draws a peak current when the compressor starts. Its own RCBO prevents faults on the rest of your lighting and appliances.
Solar panels feed power back into the meter cupboard. An inverter must always be connected to its own circuit (often a special PV RCBO) so the total current through the meter cupboard stays safe.
A home EV charger draws maximum power for hours. It must never share a circuit with ordinary sockets in the house and always needs its own circuit with Type A (or Type B/EV) RCD protection.
Under NEN 1010, a maximum of 4 circuits may sit behind one 2-pole RCD. Does your fuse box already have 4 circuits on one RCD? Then we fit a compact RCBO (circuit breaker + RCD in one component).
Clear answers to the questions homeowners in Utrecht ask most often.
In most cases, yes! If there is still physical space (a free DIN-rail module) in your fuse box, we can fit a premium-brand RCBO straight away. Is the fuse box full? Then we can mount a small extension unit next to it, or we advise upgrading to a modern Hager or ABB fuse box with enough free modules.
A normal circuit breaker only protects against overloading and short circuits, and must sit behind a separate RCD (a maximum of 4 per RCD). An RCBO combines both functions in a single module just 18 mm wide: it protects against overloading and switches off in the event of an earth fault. If this circuit trips, the rest of your home keeps its power!
That depends on your home. In newer homes (from the 1970s/80s) there are often empty conduits from the meter cupboard to the kitchen or upper floors that we can pull wire through straight away. No conduit? Then we can route the cable neatly via the crawl space, a suspended ceiling, around the outside or through neat cable trunking to the right place.
Simply adding an extra RCBO to an existing fuse box costs € 60 all-in at INO (including premium-brand materials and installation). Does a cable also need to run to the kitchen or attic, for example, including a new socket? Then the total price is usually between € 165 and € 220, depending on the distance and cable route.
Fitting and connecting an extra circuit in the meter cupboard usually takes 30 to 45 minutes. If a cable also needs to run through the crawl space or conduits to the kitchen or attic, the whole job takes 1.5 to 3 hours on average. We always leave the work area clean and tidy.
Take a photo of your open fuse box and send it via WhatsApp or our quote form. Within 24 hours (often within 30 minutes) you will know exactly what the options and fixed all-in costs are.